Short-lived polyphase deformation during crustal thickening and exhumation of a collisional orogen (Ribeira Belt,Brazil)     

《Journal of Structural Geology》2016

The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D₁-D₆) related with crustal thickening and exhumation were recognized. D₁ and D₂-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D₃ phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL₃ mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D₄ folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D₅ open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D₆ phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D₃-D₆ phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt.  相似文献   

运动学涡度在藏南冈底斯岩浆带中段谢通门-曲水韧性剪切带中的应用     

孟元库  许志琴  马士委  刘晓佳 《地质学报》2016,90(11):3023-3038

一般剪切带主要由纯剪切和简单剪切共同作用,不同的剪切带及不同的构造位置两者所占有的比例不同。利用运动学涡度(Wk)可以定量地分析两者间的比值大小。本文通过极莫尔圆法和有限应变轴率Rs/石英c轴组构法对冈底斯岩浆带中段谢通门-曲水滑覆型韧性剪切带的运动学涡度进行了计算,两种方法获得了较为一致的结果。通过极莫尔圆法,对剪切带中的9组糜棱岩样品进行了运动学涡度计算,获得了Wk=0.73~0.96,平均值Wk=0.83。运用有限应变轴率Rs/石英c轴组构法对4个样品进行了分析,得到Wk=0.85~0.93,均值为0.88,两种方法获得了较为一致的应变结果。还根据极莫尔圆图解,计算了该韧性剪切带的减薄量S=0.09~0.35,平均减薄量为0.20。研究表明该韧性剪切带为典型的以简单剪切为主伴有部分纯剪切的一般剪切,该剪切带的形成可能与拉萨地体在中新世时从挤压到侧向伸展的转换有关。该剪切带变形特征和运动学涡度的确定深化了对藏南冈底斯地区的构造演化过程的理解,并对青藏高原中南部的地质研究具有推进作用。  相似文献   

Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model     

《Applied Ocean Research》2016

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.  相似文献   

Time-domain simulation of berthing problem between FPSO and shuttle tanker in waves     

《Applied Ocean Research》2016

A time-domain simulation method based on potential flow model has been developed to investigate the berthing problem between two floating bodies in wave. The boundary value problem is formulated with respect to an earth-fixed coordinate system because the relative positions of the two vessels continuously change during the berthing operation. The classical finite element method is used to solve the Laplace equation in the fluid domain with moving boundary. The linearized free-surface boundary conditions are integrated in time by applying 4th-order Adams–Bashforth–Moulton method. A simple re-mesh algorithm with local and global mesh systems is introduced to update mesh by considering large horizontal movement of the berthing vessel. The developed numerical method is used to investigate the berthing problem between a FPSO and shuttle tanker in waves. The focus is on the wave-induced motion response during the berthing process. The characteristics of the motion responses in berthing operation are examined with various wave frequencies, berthing speeds and wave headings.  相似文献   

The impact of deformation on vortex development in a baroclinic moist atmosphere     

Na Li  Lingkun Ran  Shouting Gao 《大气科学进展》2016,33(2):233-246

A mathematical relation between deformation and vertical vorticity tendency is built by introducing the frontogenesis function and the complete vertical vorticity equation, which is derived by virtue of moist potential vorticity. From the mathematical relation, it is shown that properly configured atmospheric conditions can make deformation exert a positive contribution to vortex development at rates comparable to other favorable factors. The effect of deformation on vortex development is not only related to the deformation itself, but also depends on the current thermodynamic and dynamic structures of the atmosphere, such as the convective stability, moist baroclinicity and vertical wind shear(or horizontal vorticity). A diagnostic study of a heavy-rainfall case that occurred during 20–22 July 2012 shows that deformation has the most remarkable effect on the increase in vertical vorticity during the rapid development stage of the low vortex during its whole life cycle. This feature is mainly due to the existence of an approximate neutral layer(about 700 h Pa) in the atmosphere where the convective stability tends to be zero. The neutral layer makes the effect of deformation on the vertical vorticity increase significantly during the vortex development stage, and thus drives the vertical vorticity to increase.  相似文献   

一次春季江淮气旋形成发展特征及暴雨诊断分析     

张晓红  罗静  陈兴  靳莉莉  邱旭敏 《气象》2016,42(6):716-723

利用NCEP/NCAR的再分析资料,对2013年5月25-27日一次江淮气旋的形成发展及其引发的暴雨过程进行了诊断分析。结果表明:高空明显的正涡度平流、低层暖平流以及与辐合辐散区相对应的垂直运动是导致气旋发展的重要物理因子。气旋发展过程和湿位涡正压项及斜压项有很好的对应关系,气旋的增强阶段伴随对流层低层mpv_1的增大及mpv_2值的减小;高层湿位涡下传;使近地面大气斜压性增强,从而在低层诱生出气旋性环流。气旋的形成发展过程与对流层正涡度柱的形成相对应,与湿位涡的空间结构及其演变有密切的联系。气旋引发的暴雨位于气旋移动路径的左前方(东北象限),该区域低层强辐合中心和正涡度中心的耦合,加剧水汽和能量的辐合,为暴雨维持提供了条件。  相似文献   

中国东部城市群发展对南海夏季风爆发影响的模拟研究     

余荣  江志红  马红云 《大气科学》2016,40(3):504-514

本文利用NCAR开发的CAM5.1(Community Atmosphere Model Version 5.1)模式,针对我国东部大规模城市下垫面发展对南海夏季风爆发的影响进行了数值模拟研究。结果表明我国东部大规模城市群发展可能使得南海夏季风提前1候爆发;机理分析表明:在南海夏季风爆发之前,中国东部城市群发展引起的陆面增温,使得南海及其附近地区南北温差提前逆转、中国东部区域海平面气压降低,导致中南半岛到南海地区西南气流加强,中南半岛到南海地区降水增加,而凝结潜热垂直变化强迫出的异常环流,促进了南亚高压的加强及提前北跳,相伴随的高层抽吸作用有助于季风对流的建立和西太平洋副高的减弱东撤,从而形成了有利于南海夏季风爆发的高低层环流条件,导致南海夏季风提前爆发。另外,观测结果表明1993年之后南海夏季风爆发的日期相对上一个年代明显提前约2候,城市化快速发展阶段与南海夏季风爆发的年代际变化存在时间段的吻合,表明城市下垫面发展可能是南海夏季风提前爆发的原因之一。  相似文献   

承德市2015年2月20-21日强降雪成因分析     

杨杰  谭国明  尤国军  冯钰博  刘园园 《沙漠与绿洲气象(新疆气象)》2016,10(4):32-38

利用常规观测资料、卫星云图和NECP (1?? 1?)逐6h再分析资料,对承德市2015年2月20～21日强降雪过程环流形势和物理量场进行了分析。结果表明：在此次强降雪过程中,中、低层的西风槽、切变线和地面上东移加强的蒙古气旋构成了有利天气形势,在这些系统的共同作用下不断有干冷空气侵入承德地区与低层西南暖湿气流交汇,持续的西南暖湿气流对此次强降雪的形成和维持至关重要。相对湿度、水汽通量、垂直速度、涡度及垂直螺旋度的分布和演变很好的反映出了此次强降雪过程中物理量场特点：相对湿度和水汽通量的分布说明强降雪区上空湿度较大且有充足的水汽供应,水汽通量的增大与降雪的增强相一致,水汽通量大值中心与强降雪有很好对应关系。强降雪区上空伴有较强上升运动;降雪区上空均为正涡度时最有利于上升运动和降雪;降雪区上空垂直螺旋度均为正或呈"上负下正"的垂直结构均有利于降雪,低层正垂直螺旋度对强降雪变化有很好的指示意义。  相似文献   

1999年北京持续高温天气过程的诊断分析     

吴振鹏  武媛  李乃杰 《气象与环境科学》2016,39(1):82-88

利用北京观象台观测资料和NCEP/NCAR再分析数据,对1999年6月24日至7月2日北京一次持续性高温天气的演变和发展过程及非绝热加热作用对系统的影响进行诊断分析,结果表明：在此次高温天气发生前,欧亚大陆中高纬度环流经向度很大,欧洲北部和贝加尔湖以南为高压脊控制,中亚和我国东北地区则处于低压槽内。贝加尔湖南部的高压脊纬向延伸范围较广,在东移过程中长时间影响北京。随着贝加尔湖以南的高压脊逐渐东移,北京上空下沉增温与非绝热加热作用有所增强,北京逐渐受到高温天气影响。在高温天气发生的后半阶段,我国东北的低压槽入海后在120130°E附近维持并发展,槽前非绝热加热率很大。从垂直方向来看,加热率在500 hPa以下随高度迅速增加,根据全型涡度方程,强烈的非绝热加热率垂直分布不均作为一个明显的涡度源区,对入海低压槽的稳定维持有显著的作用。而入海低压槽的稳定维持,又阻碍了华北高压脊的东移,使其在北京地区长时间稳定少动,为北京带来多日的持续性高温天气。  相似文献   

3D inversion of gravity data by separation of sources and the method of local corrections: Kolarovo gravity high case study     

Ilya Prutkin  Peter VajdaRobert Tenzer  Miroslav Bielik 《Journal of Applied Geophysics》2011,75(3):472-478

We present a novel methodology for 3D gravity/magnetic data inversion. It combines two algorithms for preliminary separation of sources and an original approach to 3D inverse problem solution. The first algorithm is designed to separate sources in depth and to remove the shallow ones. It is based on subsequent upward and downward data continuation. For separation in the lateral sense, we approximate the given observed data by the field of several 3D line segments. For potential field data inversion we apply a new method of local corrections. The method is efficient and does not require trial-and-error forward modeling. It allows retrieving unknown 3D geometry of anomalous objects in terms of restricted bodies of arbitrary shape and contact surfaces. For restricted objects, we apply new integral equations of gravity and magnetic inverse problems. All steps of our methodology are demonstrated on the Kolarovo gravity anomaly in the Danube Basin of Slovakia.  相似文献